Due to the high value of your jewelry of ethical origin, you should treat it as if it were your most valued asset. Simple upkeep will keep your jewelry in excellent condition for many years.
Gold:
Rhodium is used to 18K white gold jewelry to make it appear white and shiny. As the rhodium plating wears away or is exposed to household chemicals, the yellowish-white hue of the metal’s native state is revealed. It is possible to have your white gold jewelry re-rhodium-plated by a specialist in order to restore its original white tint. Elleroses offers rhodium plating assistance.
A small number of our items are now offered with a black rhodium finish. Additionally, the black rhodium finish might tarnish over time, so it is preferable to have it refinished frequently.
Meteorite:
Meteorite necessitates a bit extra care when utilized because it is composed of a carbon-based material. Our jewelers added a layer of protection over the meteorite material to safeguard it from the effects of dampness. However, this protective coating can be eroded with time. Therefore, we advise you to handle your meteorite ring with extreme caution:
- Your meteorite ring should be kept away from water. We recommend that you remove your ring before doing the dishes, swimming, washing your hands, or engaging in any other activity that could expose it to water.
- By storing it in an airtight container when not in use, you can keep your ring dry and clean.
- Avoid applying harsh chemicals to your skin, such as hairspray.
The easiest approach to prevent rust from forming on your meteorite ring is to apply wax or oil to it on a regular basis. One of the following methods can be used to eliminate rust:
Method 1: Soak the ring with rubbing alcohol.
Before utilizing, soak the meteorite ring in rubbing alcohol for at least a few hours. Rinse the meteorite in running water for thirty minutes, using a toothbrush as necessary.
Allow it to air dry for at least 20 minutes on a towel or paper towel. Alcohol will evaporate naturally, so there is no need to remove it.
Finally, rub oil to the meteorite to seal it. Using a dry toothbrush and a tiny amount of gunmetal oil, scrub the meteorite until it is clean. Use a dry paper towel or cloth to wipe away any residual oil.
Cleaning Method 2: Apply WD-40 or another lubricant to the region that requires cleaning.
Clean your ring using a WD-40-sprayed soft cloth or a jewelry polishing cloth.
Using a soft-bristled toothbrush, remove the rust off the ring by gently scraping it.
Allow the residue from the WD-40 and jewelry polishing cloth to stay on the ring overnight so that it can be absorbed.
After allowing the ring wax to solidify overnight, a small layer can be put to the meteorite.
Tantalum:
To clean tantalum jewelry, moisten a sensitive cloth with warm water and a small amount of soap. A soft fabric pouch or ring box is ideal for storing jewelry when it is not being worn.
The alloy of titanium and carbon
During activities when your titanium component could be exposed to abrasions or harsh impacts, remove it. To wash:
- Adding a few drops of gentle detergent to warm water (like hand soap).
- Remove dirt and grease from the surface by scrubbing it with a wet soft cloth containing the mixture.
- With a cotton swab, it is possible to reach into the crevices.
- Utilize neither abrasive cleaners, steamers, nor ultrasonic instruments.
Platinum:
Platinum is more sensitive to tiny scratches than other metals, and it can develop a matte appearance as a result of normal use. If you prefer a more reflecting sheen, an expert can repolish the platinum surface to achieve this result.
Silver:
Moisture can tarnish and degrade sterling silver. Keep your silver in an airtight container as much as possible. Utilize a cleaning cloth for silver jewelry to eliminate tarnish and maintain its luster. Then, thoroughly wash the silver with warm water and dry it with a soft cloth. To remove more serious tarnish, use liquid silver cleaner or consult a jeweler. Avoid the use of chlorine and bleach to prevent corrosion.
Vermeil:
Before taking a shower or swimming in chlorinated or salt water, building up a sweat, or coming into contact with anything sharp or abrasive, remove your vermeil jewelry. Before applying any cosmetics, lotion, or perfume, remove all vermeil jewelry (or hand sanitizer). Ensure that it does not touch other hard surfaces while in storage. Using a soft, dry cloth, one should carefully remove dirt and grime.
Enamel:
To preserve the Enamel’s integrity, it should not be subjected to temperatures above 122 degrees Fahrenheit or harsh chemicals (acids, amines, mercaptans, and bases). To remove minor imperfections, enamel can be repolished.
Emeralds:
Due to their fragility, emeralds must be handled with care when being worked with. It is preferable to remove your emerald ring when using soap, such as in the shower or when cleaning the dishes. To avoid causing damage to the jewelry, do not clean it using ultrasonic or steam cleaners, acetone, or other powerful cleansers. Avoid wearing your emerald ring with other rings or when handling hard objects, rubbing the ring against other objects, or applying pressure to your hands. Weightlifting and rock climbing are examples of activities that fit into this category. To clean your Emerald, use lukewarm water, mild soap, and a soft toothbrush. Remove dirt and oil off the underside of the emerald by repeatedly brushing it. Finally, dry the ring with a delicate cotton cloth to remove any lingering moisture. If you take care of your emerald, it will endure a very long time.
Other Gemstones:
Be mindful of the settings on your jewelry. Long-used prongs are especially susceptible to becoming dislodged if snagged or struck against the ground. If the prongs become loose, gems may become dislodged or tumble out of position. To ensure that the jewels and the ring’s structure remain secure, you should get your jewelry inspected by a professional every six months and whenever it is broken, hit, or scratched in an unusual way.
Pavé Settings:
This type of setup style is exceedingly fragile, necessitating proper maintenance to assure its longevity. Avoid wearing jewelry with pavé-set stones in locations where friction or abrasion may cause the metal beads holding the stones in place to wear out. Avoid applying excessive force to the pavé settings or damaging them by scratching them. Check for loose stones in pavé-set jewelry at least once every six months and promptly if the jewelry has been broken, scratched, or otherwise compromised. If pavé-set gemstones are lost, they may be replaced for a charge. This perk is complimentary with the purchase of an Elleroses Extended Service Plan.
Insurance:
As a precaution, fine jewelry should be insured against theft, loss, and damage as a result of daily use. As an example, insurance companies such as Lavalier offer jewelry insurance as a standalone policy or as an add-on to a range of homeowner and rental plans.
Wearing Jewelry:
If struck with sufficient force or at the correct angle, even diamonds can be chipped. Protect your valuables when engaging in sports or manual labor. Avoid exposing your jewelry to strong chemicals such as chlorine and bleach. Avoid contact with surfaces that are abrasive. Make sure your jewelry does not come into contact with harsh chemicals like perfumes, cosmetics, and home cleaners. Avoid wearing delicate metal rings when gripping something that requires force, such as a bicycle handlebar or a weight, as the pressure could bend or break the rings. Also, when wearing jewelry, avoid putting excessive pressure on the jewelry or the hands.
Home & Professional Cleaning:
Air pollution, grime, and wear and tear can diminish the brightness of a gemstone. Depending on how often you wear your jewelry, a professional cleaning may be advised annually or even more regularly. Between professional cleanings, you can clean your diamond and sapphire jewelry with Elleroses’ gem & jewelry cleaner. Alternatively, you can apply a solution of six parts water to one part ammonia with a soft bristles brush. Using lukewarm water and a soft cloth, thoroughly rinse the item. Avoid ultrasonic cleaners if you wish to clean Elleroses jewelry at home. As with diamond and sapphire, pearl and emerald jewelry requires specific care and should not be cleaned in the same way as diamond and sapphire. Pearls and emeralds can be cleaned and dried using a gentle soap and water solution. Dry pearls can be cleaned with a gentle, lint-free cloth.
Jewelry in the Vintage Style:
Our vintage-inspired jewelry is entirely unique. Antique beautiful jewelry should therefore be worn with considerable discretion. Avoid excessive activity, exposure to harsh chemicals, and taking a shower while wearing your antique fine jewelry. Some antique rings can be cleaned with warm soapy water and a soft toothbrush, but older rings should not be submerged in water. If you have any queries regarding the care of your individual work, please contact us. We recommend getting your antique jewelry evaluated every six months or anytime it is damaged.